Oki 6200E Printer User Manual


 
OkiLAN 6200e Plus User’s Guide
TCP/IP 82
its IP address after 2 minutes, it defaults to
192.0.0.192. (This IP address should be used only
temporarily for configuration purposes.)
To choose an IP address:
1. Select an IP address and hostname for the Net-
work Print Server. Example: 192.168.42.50 Net-
work Print Server_name
2. Add the name and IP address to the “/etc/hosts”
file of each host that will access the Network Print
Server. Or, if your network uses a name service,
add the host name and IP address to the name
server.
Most TCP/IP networks use the Network Information
Service (NIS), Domain Name Service (DNS) or the “/
etc/hosts” database. See your network documentation
for instructions.
Configuring the Network Print Server
There are four utilities available to configure the Net-
work Print Server for TCP/IP printing. You may use
whichever utility is best suited for your needs.
OkiNet for TCP/IP - Windows TCP/IP print man-
ager utility. See OkiNet for TCP/IP for more infor-
mation.
Network Print Server Configuration Utility - This
utility is accessed via telnet. See Telnet Configura-
tion for more information. In order to configure the
Network Print Server via telnet, you must first
assign an IP address to the Network Print Server
and verify communication by pinging the device.