Filter
Top Products
OkiLAN 6200e Plus User’s Guide
LAN Manager/LAN Server 170
Note: The directory where OKI DLL files install,
c:\OS2\DLL, must be the first entry in the LIBPATH
command located in the CONFIG.SYS file. When
you reboot the system, the OS/2 spooler will load
the OKI Network Printer Redirector.
Running INSTALL
1. Login to the server with administrator privileges. If
you are reinstalling the utility, disable the spooler
before running install. If this is the first time you
have installed the utility, disabling the spooler is
optional.
2. From the OS/2 command line, change to the OS/2
directory.
3. Check the README file for current installation
notes.
4. Type INSTALL and press Enter.
5. Verify the install directories are correct.
6. Select INSTALL to proceed. When the utilities are
installed, you will see a message indicating that the
installation was successful. If the install was not
successful read through the comments in the
Install Progress window for errors and recom-
mended action.
7. Select Exit.
Completing the Installation
After the OKI software has been installed, you must do
the following:
1. Verify the OS/2 spooler is enabled.