Filter
Top Products
Page: 83
Service Guide ML520/521
Chapter 3 Maintenance & Disassembly
3.2.14 Roller/Holder Backup Assembly
1. Perform these procedures:
3.2.01
, 3.2.02 , 3.2.04 , 3.2.10 , and 3.2.11 .
2. Use a small straight slot screwdriver to disengage the claws of the backup roller holder spring (1) from
the carriage frame (2).
3. Remove the roller/holder backup assembly (3).
NOTE:
The roller/holder backup assembly includes the backup roller (4), the backup roller holder (5), and the
pin (6).
P/N 53343201 Assembly: Roller/Holder Backup Both B.2.07
P/N 53341701 Roller: Back Up RSPL Both B.2.07
P/N 53341801 Holder: Back Up Roller RSPL Both B.2.07
P/N N/A Pin Both B.2.07
P/N 50925001 Backup Roller Holder Spring Both B.2.07
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)