Filter
Top Products
Paper Out Override
No
Yes
Print Registration
O
0.05 mm Left 0.10 mm Left 0.15 mm Left 0.20
mm Left 0.25 mm Left 0.25 mm Right 0.20 mm
Right 0.15 mm Right 0.10 mm Right 0.05 mm
Right
Operator Panel Function
Full Operation
Limited Operation
Reset Inhibit
No
Yes
Print Suppress Effective
Yes
No
Auto LF
No
Yes
Auto CR * * * *
No
Yes
CSF Bin Select * * *
Bin 1
Bin 2
Print DEL Code * *
No
Yes
SI Select Pitch (10 CPI) * *
* *
17.1
15 cpi
SI Select Pitch (12 CPI) * *
* *
20
12 cpi
Time Out Print
Valid
Invalid
Auto Select
No
Yes
Printhead Gap Adjust
0
- 1 + 1
* Model 521 only
* * Appears only when Microline emulation is selected
* * * Appears only when optional Cut Sheet Feeder is installed
* * * * Appears only when IBM Proprinter emulation is selected
* * * * * Appears only when Epson LQ emulation is selected
* * * * * * Appears only when optional Serial Interface is installed
* * * * * * * Appears only when optional Roll Paper Stand is installed
Factory default settings are printed in
Bold Italic
.