Filter
Top Products
140
5. System settings
5-7. External device control
5-7-1. Enable/Disable Setting for Control of External Devices
Set up the control of the external devices (editor, pan-tilt head and/or controller) that have been connected to the
RS-422 connector.
Press the [CTL] button to light its indicator and display the CTL menu.
Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the RS422 sub menu.
<Menu display>
CTL 1
|
Edit-EN
|
COM-EN
|
|
RS422 | Enable| Enable| |
Disable Disable
Turn [F2] and use the Edit-EN item to set up the control of the unit from the external device (editor)that has
been connected to the EDITOR connector.
Enable: Control is enabled.
Disable: Control is disabled.
Turn [F3] and use the COM-EN item to set up the control of the external device (pan-tilt head, controller) that
has been connected to the COM connector.
Enable: Control is enabled.
Disable: Control is disabled.
The Edit-EN item and COM-EN item settings can be assigned to user buttons.
Refer to “5-3-1. Setting the user buttons”.