Filter
Top Products
93
3. Basic operations
3-12-2. Saving data on SD memory cards
Insert the SD memory card which has been initialized by the unit, into the SD memory card slot.
Press the [SDCard] button to light its indicator and display the SDCard menu.
Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the File sub menu.
Turn [F2] to select “Save” using the Mode item, and then press the [F2] switch.
<Menu display>
SDCard 1
|
Mode↓
|
Select
|
SaveFile Exec↓
File |
Save| —|
FMEM1~4
SetUp
Turn [F3] to select the data which is to be stored on the SD memory card using the Select item.
FMEM1 to 4: Still image data in frame memories 1 to 4
SetUp: Setup data
If the [F5] switch is now pressed, the file is stored on the SD memory card.
Filenames are provided automatically using the running number as shown below.
HS001.bmp to HS999.bmp
<Configuration of folder at storage destination>
System data: “HS400\SETUP” folder
Still image data: “HS400\IMAGE” folder
While the file is being stored, the following message and filename are displayed.
SDCard 1
|
∙∙∙Saving File∙∙∙
File | HS001