Filter
Top Products
170
Menu
Sub menu
Parameter 1 Parameter 2 Parameter 3 Parameter 4
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
CAM CAM 1 Parameter CTL Signal Tally Protcol
CamCTL1 Setting range 1 to 5 IN1 to 16,
IN-A1, IN-A2, IN-
B1, IN-B2, None
Enable, Disable P/TCont,
P/TDirt
Default value 1 None Disable P/TCont
CAM 2 Parameter CTL PosCont PTSpeed Power ↓
CamCTL2 Setting range 1 to 5 PanTilt,
Zm/Focs
Fast, Middle, Slow On, Off
Default value 1 PanTilt Fast On
CAM 3 Parameter CTL C-Menu ↓ Item Val/Y/N
CamMenu Setting range 1 to 5 On, Off Cursor Cursor
Default value 1 — — —
XPT XPT 1 Display only
XPT: 1 2 3 4 5 6 7 8
SIG:BK 1 2 3 4 5 6 7
Status1
XPT 2 Display only
XPT: 9 10 11 12 13 14 15 16
SIG: 8 9 10 11 12 13 14 Sf
Status2
XPT 3 Display only
XPT:17 18 19 20 21 22 23 24
SIG:15 16 A1 A2 B1 B2 - -
Status3
XPT 4 Display only
XPT:25 26 27 28 29 30 31 32
SIG:- PG PV KO CL M1 M2 Sf
Status4
XPT 5 Parameter XPT Signal Shift Sf-Lock
XPTAsign Setting range 1 to 32 IN1 to 16,
IN-A1, IN-A2, IN-
B1, IN-B2, Black,
CBGD, CBAR,
FMEM1 to 4,
PGM, PVW, CLN,
MV1,
MV2 (AUX bus
only), None
Off, Right, Left On, Off
Default value — — Right Off
XPT 6 Parameter Timing
XPT Swch Setting range Any, Field1, Field2
Default value Any
8. Setting menu table