Panasonic CF-W8 Personal Computer User Manual


 
116
Troubleshooting (Advanced)
The cursor cannot be controlled properly
z Sensitivity when touching the Touch Pad can be adjusted. (Î page 11)
z Make sure [Touch Pad] is set to [Enabled] on the [Main] menu of the Setup Utility. (Î page 99)
z With the following procedure, check that no external mouse driver is installed. If it is installed, it may not possible to use
the Touch Pad.
A Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
B Double-click [Mice and other pointing devices].
If a name other than [Synaptics PS/2...] is displayed, then an external mouse driver is installed. Delete it, then
restart the computer.
z Restart the computer by using the keyboard.
Press ,
U
, and select [Restart] with Î Í Ï Ð, then press
Enter
.
If the computer does not respond to keyboard commands, read No response”. (Î page 114)
<Only for CF-T8 Series with Windows XP Tablet PC Edition>
z Click [start] - [Control Panel] - [Add or Remove Programs], and check that [FCL USB Pen Tablet] is displayed.
If it is not displayed:
It is necessary to install the touchscreen driver.
Click [start] - [Run], and input “c:\util\drivers\tscreen\TPSetUp.exe”, then click [OK].
Follow the on-screen instructions to complete installation.
The cursor moves randomly
z Adjust the touch sensitivity.
To adjust the sensitivity, refer to “Adjusting the Sensitivity when Touching the Touch Pad” (Î page 11).
z Check that no external mouse driver is installed. (Refer to steps A and B under “The cursor cannot be controlled prop-
erly” above.)
z <Only for CF-T8 Series>
Do not press the area around the display. The cursor may move to the edges of the screen.
Problems with Cursor