Filter
Top Products
120
Troubleshooting (Advanced)
Pressing a letter key produces a number
z The computer may be in ten-key mode.
If NumLk indicator lights up, press
NumLk
, to disable the ten-key mode, and then input.
Only capital letters are being input
z The computer may be in Caps Lock mode.
If Caps Lock indicator lights up, press
Caps Lock
, to disable the Caps Lock mode, and then input.
How to input European characters (ß, à, ç etc.), symbols or Euro currency sym-
bol is unclear
z With the following procedure, enter a character using the code table.
A Click [start] - [All Programs] - [Accessories] - [System Tools] - [Character Map].
B Point to the desired font name, such as European fonts, and select it.
Combined key operations with the Fn key do not work
z Check whether [Fn/Ctrl Key] is set to [Replace] in the [Main] menu of the Setup Utility. (Î page 99).
Change the setting back to [Normal], or if continuing with [Replace] selected, use
Ctrl
in place of
Fn
.
<Only for CF-T8 Series>
Cannot input by touching the display
z When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to be used. Install the touchscreen driver
again. (Î page 14)
z Has the touchscreen driver been properly installed?
Problems with Input