Filter
Top Products
68
SD/SDHC Memory Card
CAUTION
z Do not remove or insert the SD/SDHC Memory Card until Windows has completed loading.
z Do not remove the card or turn off the computer in the following cases, otherwise the data may be corrupted.
Just after the writing operation.
The computer may still continue the access to the card just after writing operation. If you remove the card before the
operation is completed, the data may be damaged or the card access may no longer perform normally.
z Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages,
directly or indirectly.
z Do not forcibly draw out the card, otherwise the slot may be damaged.
z Insert the card in the correct direction, otherwise the card and the slot may be damaged.
z After resuming from standby or hibernation, do not access the SD/SDHC Memory Card for approximately 30 seconds.
To insert the card
1 Insert the SD/SDHC Memory Card with the label side facing up and with the cut corner on
top.
To remove the card
Preparation
z Save the data and close all applications.
z Confirm the SD Memory Card indicator is off.
z When SD Memory Card security function is enabled, it may be possible to remove
the card even when is blinking.
1 Disable the card function.
A Double-click on the notification area and select [SD Memory Card],
then click [Stop].
B Follow the on-screen instructions.
z This step is not necessary when removing the card after turning off the
computer.
Inserting/Removing the SD/SDHC Memory Card
CF-F8 Series
CF-W8/CF-T8 Series