Filter
Top Products
81
Modem
The computer automatically resumes from standby when the telephone connected to the modem rings.
You will need software to keep the computer in an idle state waiting for a phone call, and if you prefer, to turn the computer to
standby again afterward. For further information, refer to the instruction manual of the software application.
1 Click [start] - [Printers and Faxes].
2 Click [Set up faxing] in the [Printer Tasks] area on the left.
z This operation is not necessary next time.
3 Right-click the fax icon and then click [Properties].
4 Click [Devices] - [Properties].
5 Click [Receive], and then add the check mark for [Enable device to receive] and click
[OK].
6 Click [Device Manager] in [start] - [Control Panel] - [Performance and Maintenance] - [Sys-
tem] - [Hardware].
7 Double-click [Modems], and then double-click the internal modem.
8 Click [Power Management], add the check mark for [Allow this device to bring the com-
puter out of standby], then click [OK].
To set the time to return the computer to standby
The computer will enter standby after the set time even when the communication is not completed. You can avoid such
uncompleted communication if you select [Never], but the computer does not return to standby after resuming by a phone
call.
A Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes].
B Set the expected communication time.
Ring Resume Function