Filter
Top Products
1. Introduction and Installation
14
For assistance, please contact an authorized Panasonic dealer.
1.7 Recording paper
The standard input tray unit can hold:
– Up to 520 sheets of 75 g/m
2
(20 lb) paper.
– Up to 470 sheets of 80 g/m
2
(21 lb) paper.
– Up to 410 sheets of 90 g/m
2
(24 lb) paper.
– Up to 100 sheets of 105 g/m
2
(28 lb) paper.
– Up to 25 transparencies.
*1
– Up to 25 labels.
*1
*1 Only when using the unit as a printer. See page 29
for details.
L The unit is set for printing letter-size plain paper
by default.
– To use other paper sizes, change the
recording paper size setting (feature #380 on
page 59).
– To use thin or thick paper, change the
recording paper type setting (feature #383 on
page 60).
Note for recording paper:
L We recommend that you test paper (especially
special sizes and types of paper) on the unit before
purchasing large quantities.
L Do not use the following types of paper:
– Paper with cotton and/or fiber content that is over
20 %, such as letterhead paper or paper used for
resumes
– Extremely smooth or shiny paper, or paper that is
highly textured
– Coated, damaged or wrinkled paper
– Paper with foreign objects attached, such as tabs
or staples
– Paper that has dust, lint or oil stains
– Paper that will melt, vaporize, discolor, scorch or
emit dangerous fumes near 200 °C (392 °F),
such as vellum paper. These materials may
transfer onto the fusing roller and cause damage.
– Moist paper
– Inkjet paper
L Some paper is designed to be printed on only one
side. Try printing on the other side of the paper if you
are not happy with the print quality, or if misfeeding
occurs.
L For proper paper feeding and best print quality, we
recommend using long-grained paper.
L Do not use paper of different types or thicknesses at
the same time. This may cause paper jams.
L Do not use paper printed from this unit for double-
sided printing with other copiers or printers. This may
cause paper jams.
L To avoid curling, do not open paper packs until you
are ready to use the paper. Store unused paper in
the original packaging, in a cool and dry location.
L For customers who live in high humidity areas:
Please be sure to store paper in an air-conditioned
room at all times. If you print using moist paper, it
may cause paper jam.
1 Pull the standard input tray (1) until it clicks into
place, then pull it completely out, lifting the front part
of the tray.
2 Before loading a stack of paper, fan the paper to
prevent paper jams.
3 Pinch the right side of the recording paper guide
(2), then slide it to match the paper size mark.
Pinch the front and back recording paper guides (3)
at the same time, then slide them together to match
the paper size mark.
4 Load the paper, print-side up (4).
1
2
3