Filter
Top Products
5. Copier
36
5CopierCopy
5.1 Making a copy
5.1.1 Using the scanner glass
1
If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2 Set the original (page 19).
3 If necessary, change the copy settings according to
the type of document.
L To change the number of copies, see page 36.
L To select the contrast, see page 36.
L To select the resolution, see page 36.
L To select the zoom rate, see page 36.
4 {Start}
L If the copy input tray prompt (feature #471 on
page 68) is activated, select the desired
recording paper size by pressing {<} or {>}
repeatedly, then press {Start} again.
L The unit will start copying.
5 After you finish copying, press {Stop} to reset the
settings you set in step 3.
Note:
L To stop copying, see page 78.
L You can change the default operation mode (feature
#463 on page 60) and the timer before returning to
the default operation mode (feature #464 on page
60).
L If the {Fax Auto Answer} light is ON, the unit can
receive faxes automatically even when in the copy
mode.
To change the number of copies
1. Press {V} or {^} repeatedly to select “Copies”.
2. Enter the number of copies (up to 99).
3. {Set}
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press {V} or {^} repeatedly to select “Contrast”.
2. Press {<} or {>}. i {Set}
Note:
L You can hold the previous contrast setting (feature
#462 on page 60).
To select the resolution
1. Press {V} or {^} repeatedly to select
“Resolution”.
2. Press {<} or {>} repeatedly to select the desired
resolution.
– “Text/Photo”: For both text and photographs.
– “Text”: For text only.
– “Photo”: For photographs, shaded drawings,
etc.
3. {Set}
Note:
L You can change the default resolution (feature #461
on page 67).
To select zoom rate (enlargement / reduction)
1. Press {V} or {^} repeatedly to select “Zoom”.
2. Press {<} or {>} repeatedly to select the zoom rate
that fits the size of your document and recording
paper.
– “100%”
– “50%”
– “200%”
L You can enter the desired percentage from
“25%” to “400%” specifically by using the dial
keys.
L Additional zoom rates can be selected according
to the recording paper size setting (feature #380
on page 59 or feature #382 on page 59).
3. {Set}
Note:
L Zoom copy is not available for the following features:
– Quick ID copy feature (page 39)
– Easy repeat feature (page 39)
– Poster feature (page 40)
{Set}{V}{^}{<}{>}
{Copy}
{Fax Auto Answer}
{Stop}
{Start}
Feature #380/#382 setting Additional zoom rate
“Letter”“A4→Letter”
“Legal→Letter”
“A4”“Letter→A4”
“Legal→A4”
“Legal” –