Filter
Top Products
5. Copier
37
– N in 1 feature (page 40)
– Separate N in 1 feature (page 40)
– Booklet feature (page 41)
L You can hold the previous zoom setting (feature #468
on page 67).
L When using the scanner glass, the unit will only
enlarge the right top corner of the document starting
from the m mark on the unit.
L When using the automatic document feeder, the
unit will only enlarge the center of the upper part of
the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy.
Example: 150 % enlarged copy
Using the scanner glass (1):
Using the automatic document feeder:
Example: 70 % reduced copy
Using the scanner glass (1):
Using the automatic document feeder:
5.1.2 Using the automatic document feeder
1
If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2 Set the original (page 20).
3 If necessary, change the copy settings according to
the type of document.
L To change the number of copies, see page 36.
L To select the contrast, see page 36.
L To select the resolution, see page 36.
L To select the zoom rate, see page 36.
4 {Start}
L If the copy input tray prompt (feature #471 on
page 68) is activated, select the desired
recording paper size by pressing {<} or {>}
repeatedly, then press {Start} again.
L The unit will start copying.
5 After you finish copying, press {Stop} to reset the
settings you set in step 3.
Note:
L To stop copying, see page 78.
Original document Enlarged copy
Original document Enlarged copy
Original document Reduced copy
Original document Reduced copy
1
1
{Start}
{Copy}
{Stop}
{<}{>}