Filter
Top Products
9. Programmable Features
62
Setting the waiting time for
the power save mode
{#}{4}{0}{3}
To set the length of time before the unit enters power save mode.
{1} “5min”: 5 minutes
{2} “15min” (default): 15 minutes
{3} “30min”: 30 minutes
{4} “1h”: 1 hour
Note:
L When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Holding the previous contrast
setting
{#}{4}{6}{2}
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes.
Setting the default operation
mode
{#}{4}{6}{3}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} “Copy” (default): Copy mode is selected as default.
{2} “Fax”: Fax mode is selected as default.
Note:
L You cannot select the scan mode or print mode using this feature.
Setting the default operation
mode timer
{#}{4}{6}{4}
To set the timer before returning to the default operation mode (feature #463).
{0} “Off”: Deactivates this feature.
{1} “30s”: 30 seconds
{2} “1min” (default): 1 minute
{3} “2min”: 2 minutes
{4} “5min”: 5 minutes
Cleaning the drum
{#}{4}{8}{0}
Clean the drum cartridge automatically. See page 110 for details.
Setting toner save feature
{#}{4}{8}{2}
{0} “Off” (default): Deactivates this feature.
{1} “On”: The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
Changing the color
calibration for all colors
(cyan, magenta, yellow and
black)
{#}{4}{8}{5}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Changing the color
calibration for cyan
{#}{4}{8}{6}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Changing the color
calibration for magenta
{#}{4}{8}{7}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Changing the color
calibration for yellow
{#}{4}{8}{8}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Changing the color
calibration for black
{#}{4}{8}{9}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Feature/Code Selection