Filter
Top Products
10. Useful Information
80
10.4 Changing the color
calibration
If color printing is too dark or too light, change the color
calibration.
1 Select the desired color to change the calibration.
L To change the color density for cyan, magenta,
yellow and black, press {Menu}. i
{#}{4}{8}{5}
L To change the color calibration for cyan, press
{Menu}. i {#}{4}{8}{6}
L To change the color calibration for magenta,
press {Menu}. i {#}{4}{8}{7}
L To change the color calibration for yellow, press
{Menu}. i {#}{4}{8}{8}
L To change the color calibration for black, press
{Menu}. i {#}{4}{8}{9}
2 Select the desired color calibration.
{0} “-5”
{1} “-4”
{2} “-3”
{3} “-2”
{4} “-1”
{5} “0” (default)
{6} “1”
{7} “2”
{8} “3”
{9} “4”
{*} “5”
3 {Set}
4 Press {Menu} to exit.
Printing a color test
You can print the color test to check the color density for
each color (page 110).
10.5 SD card
You can print files stored on an SD card and save files to
an SD card.
This unit supports the following commercially available
memory cards. These are referred to as SD cards in the
operating instructions.
– SD Memory Card (up to 2 GB)
*1
– SDHC™ Memory Card (up to 32 GB)
*1
– miniSD™ Card (up to 2 GB) (adaptor required)
*2
– miniSDHC™ Card (up to 16 GB) (adaptor required)
*2
– microSD™ Card (up to 2 GB) (adaptor required)
*2
– microSDHC™ Card (up to 16 GB) (adaptor
required)
*2
*1 Equipped with a write-protect switch that can prevent
data from being written to the card.
*2 First insert the card into the adaptor, and then insert
the adaptor into the SD card slot. The card adaptor is
equipped with a write-protect switch that can prevent
data from being written to the card.
L To ensure that the unit operates properly, we
recommend the use of Panasonic SD cards.
Important:
L Do not remove the SD card or turn the power
switch off while reading or writing data to avoid
damage to the data.
L Be sure to make a backup copy of the data.
L We are not responsible for any damages incurred
to your SD card resulting from corrupted, or lost
data.
L When the write-protect switch is in the lock
position, it is not possible to write data to the
card. Be sure that the switch is unlocked (1) to
ensure correct operation.
Note:
L Confirm the SD card icon and the SD card access
icon on the display (page 9). If the SD access icon is
green, the SD card is working correctly.
L An SD card is not supplied. Please purchase a
supported SD card.
L The access speed may be slightly different
depending on the kind of SD card.
L For details on the SD card, see the operating
instructions of the SD card.
1