Filter
Top Products
11
Initial Preparation
23
456
789
0
1
Setting the date, time, logo and facsimile
telephone number
Before using your unit, program the correct date and time, your logo and your facsimile telephone
number.
This information will be printed on the top of each page transmitted from your unit.
To change the print position, see page 58.
Setting the date and time
1
Press (MENU).
2
Press K, then @A.
3
Press (START/COPY/SET).
4
Enter the correct month/day/year/hour/minute by
selecting each 2 digits.
Then press J for AM or K for PM.
Example: Aug. 10 1996, 3:00PM
Press @H A@ IF @C @@,
then press K for PM.
5
Press (START/COPY/SET).
6
Press (MENU).
SET DATE & TIME
SYSTEM SET UP
Note:
¡If you make a mistake while programming, press
(STOP) then make corrections.
¡The accuracy of the clock will be approximately L60
seconds a month.
(MENU)
(STOP)
(START/COPY/SET)
Dial keypad