Filter
Top Products
38
1
Insert the documents FACE DOWN.
2
Press (MENU).
3
Press K, then press B E.
4
Press (START/COPY/SET).
5
Press (‹) or (›) to select “ON”.
¡If this feature is not required, select “OFF”.
6
Press (START/COPY/SET).
7
Enter the phone number by using one-touch
dialing, speed dialing, full number dialing or the
electronic telephone directory.
8
Press (START/COPY/SET).
9
Enter the transmission start time.
Example: 11:00PM
Press a a @ @, then press k to
select PM.
To select AM, press j.
10
Press (START/COPY/SET).
11
Press (MENU).
¡When the programmed time has come, the
unit will automatically start transmission.
TIME=12:00AM
NO.=
MODE=ON [ÿŸ]
MODE=OFF [ÿŸ]
DELAYED XMT
SYSTEM SET UP
Delayed transmission
(sending a fax at a later time)
Using a built-in clock, this unit can send documents automatically at a specific time. This allows you to take
advantage of low-cost calling hours offered by your telephone company.
The delayed transmission can be reserved to take place up to 24 hours.
Note:
¡You can receive, transmit and copy documents while delayed transmission is set.
¡When transmit polling (see page 37) is ON, delayed transmission is not available.
FACE DOWN
(MENU)
(START/COPY/SET)
Dial keypad
(‹) (›)