Filter
Top Products
52
■ Erasing a specific message from
memory
■
Press J D when the message you want to
erase is played.
■ —A long beep and the voice guide will be heard.
Then the unit will continue with the next message.
■ Repeating a message:
■
Press A to play the current message.
■ —If you press A within 5 seconds of playback, the previous message will be played.
■ Skipping a message:
■
Press B to play back the next message.
■ Erasing all messages from a specific memory
■
You can erase all of the recorded messages from common and each mailbox memory.
To erase all of the messages in a mailbox, you must first select a mailbox.
Erasing incoming messages from memory
During playback
■ Press J E when you want to erase the messages
in a specific memory.
—A long beep and the voice guide will be heard.
Example of the voice guide:
Example of the voice guide:
■ Note:
¡If you hear the voice guide after playing back the
messages, memory is full. Erase some or all of the
messages.
■ Monitoring the room sound
■
You can monitor the sound in the room where the unit is installed.
Press F during the remote operation.
—You can monitor the room sound for about 30 seconds.
■ Note:
¡After 30 seconds are up, a beep sounds. To continue monitoring, press F again within 10 seconds.
Other remote operations
Not enough recording time. Please erase
unnecessary messages.
The message has been erased.
All messages have been erased.
Example of the voice guide: