Filter
Top Products
70
A C
B
Adjusting the feeder pressure
No feeding or multiple feeding occurs frequently, adjust the feeder pressure.
1
Open the front lid by pressing the front lid open
button.
2
Shift the position of the lever by using an
instrument with a pointed end, like a clip or ball-
point pen.
Position A: Select this when documents do not
feed.
Position B: Standard position (pre-selected)
Position C: Select this when documents multiple
feed.
3
Close the front lid by gently pressing down on both
ends.
Lever
Front lid open
button
1
Set the handset switch to NO HANDSET (see
page 60).
2
Pull the hooks to the right in the order as shown,
while lifting up the handset cradle.
3
Disconnect and connect the power cord again.
1
2
Removing the handset cradle
To save space or to use the unit mainly for faxes, you may remove the handset cradle.
Caution:
¡If the handset and handset cradle have been
removed when you connect the power cord, an
alarm will sound and the following message will
be displayed.
¡Set the handset switch to NO HANDSET (see
page 60).
CHECK CRADLE
Hooks