Filter
Top Products
TONE button
The TONE (*) button is used for rotary pulse dial
services and allows you to temporarily change from
pulse to tone mode during a dialing operation.
When you hang up, the unit will automatically return to
pulse mode.
FLASH button
The FLASH button functions as the hookswitch on a
regular phone. If you misdial or dial another phone
number, press the FLASH button firmly.
The FLASH button also allows you to use special
features of a host exchange (if connected) or local
telephone company services such as call waiting. For
further details, contact your local telephone company.
2 3
4 5 6
7 8 9
0
1
36
TONE, FLASH and REDIAL/PAUSE buttons
9 PAUSE Phone number
Line access code
International
access code
Country
code
Phone
number
PAUSE PAUSE
Example-2: If transmission errors occur when making an overseas transmission, add two pauses at the end
of the phone number.
Redialing the last number dialed
If the REDIAL/PAUSE button is pressed immediately after a dial tone is obtained, the last number dialed will
be redialed.
1. Lift the handset or press (DIGITAL\SP-PHONE).
2. Press (REDIAL/PAUSE).
¡If the line is busy when using the speakerphone, the unit will automatically redial the number up to
14 times.
Note:
¡TONE, FLASH and PAUSE can be stored
into a phone number for automatic dialing.
Entering pauses
If the REDIAL/PAUSE button is pressed during dialing, a pause will be inserted.
Example-1: When your unit is connected to a host exchange, insert a pause to get an outside line.
(FLASH)
(TONE)
(REDIAL/PAUSE)