Filter
Top Products
Receiving using an extension
40
2 3
4 5 6
7 8 9
0
1
1
Press (MENU).
2
Press K, then D A.
3
Press (START/COPY/SET).
4
Press (‹) or (›) to select the desired setting.
¡If this feature is not required, select “OFF”.
5
Press (START/COPY/SET).
6
Enter the new code number.
7
Press (START/COPY/SET).
8
Press (MENU).
CODE=UU
MODE=ON [ÿŸ]
REMOTE FAX ACT.
SYSTEM SET UP
Remote fax receiving
(using an extension to receive a fax message)
If you have an extension phone on the same line, it is possible to receive a fax message. Using the extension
phone, dial the remote fax activation code.
This saves you from going to the facsimile unit and pressing (START/COPY/SET).
Important:
¡To activate this feature, use a touch tone telephone as the extension phone and enter the remote fax
activation code FIRMLY.
¡The remote fax activation code is set to “UU” as a pre-selected setting.
1
When a call is received, lift the handset of the
extension phone.
2
When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
enter the remote fax activation code FIRMLY.
3
Hang up the handset.
¡The facsimile unit is activated for reception.
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9 and the character *.
Note:
¡Some special telephone company services
will require you to press a service access
code. If you subscribe to such services,
whole or part of the remote fax activation
code must be different from the service
access code.
¡If the remote fax activation code is set to
“0000”, the unit does not work properly.
(MENU)
Dial keypad
(START/COPY/SET)
To the same line
Extension phone
(‹) (›)