8
Installing your unit
Installing the handset cradle
If you want to use this unit with a handset, install the handset and handset cradle.
¡To save space or to use the unit mainly for faxes, you may remove the handset cradle.
Even if the handset and handset cradle are not installed, you can make or answer calls using the
SP-PHONE button. When you don’t use the handset and handset cradle, see pages 60 and 70.
3
Insert the handset cradle by matching the
triangles.
Hooks
2
A Open the front lid by pressing the front lid open
button.
B Open the back lid by lifting up the tabs located
on both sides.
4
Press down on the marked on the handset
cradle until it clicks into place.
¡Make sure the two hooks lock the handset
cradle firmly.
1
Connect the handset cord.
Triangles
A
B
Front lid open
button
Tab
Handset
Handset cord
5
Place the handset on the handset cradle and close
the lids securely.
¡If the following message is displayed when the
unit is turned on, the handset cradle is not
installed correctly.
Check step 4 again.
CHECK CRADLE
Triangles