Filter
Top Products
6. Fax
47
6.4.2 Adding a new item into the broadcast
memory
1
{Directory}
2 Press {V} or {^} repeatedly to display the desired
broadcast memory (“<BROADCAST>” or “<MANUAL
BROAD>”). i {Menu} i {*}
3 Press {V} or {^} repeatedly to display the desired
item you want to add. i {Set}
L To add other items, repeat this step (up to 20
items).
4 {Stop}
Note:
L When adding new items to the MANUAL
BROADCAST memory, you can only select stored
items.
6.4.3 Erasing a stored item from the
broadcast memory
1
{Directory}
2 Press {V} or {^} repeatedly to display the desired
broadcast memory (“<BROADCAST>” or “<MANUAL
BROAD>”). i {Menu} i {#}
3 Press {V} or {^} repeatedly to display the desired
item you want to erase.
L To cancel erasing, press {Stop}.
4 {Set} i {Set} i {Stop}
6.4.4 Sending the same document to pre-
programmed parties
To send the same document using the scanner glass
1. Set the original (page 19).
2. If necessary, change to the desired resolution (page
43) and the desired contrast (page 43).
3. Press {Broadcast} or {Manual Broad}.
L To send a single page, skip to step 5.
L To send multiple pages, go to the next step.
4. Place the next page. i {Set}
L To send more pages, repeat this step.
5. {Black}
Note:
L To stop sending, see page 76.
L If you select “FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
send will decrease.
L If the document exceeds the memory capacity,
sending will be canceled.
L If a party is busy or does not answer, it will be skipped
and redialed later.
L After transmission, the unit will automatically print a
report (broadcast sending report).
To send the same document using the automatic
document feeder
1. Set the original (page 20).
2. If necessary, change to the desired resolution (page
43) and the desired contrast (page 43).
3. Press {Broadcast} or {Manual Broad}.