Filter
Top Products
9. Programmable Features
59
Setting the recording paper
type
{#}{3}{8}{3}
{1} “PLAIN PAPER” (default): 75 g/m
2
to 105 g/m
2
(20 lb to 28 lb) paper.
{2} “THIN PAPER”: 60 g/m
2
to 74 g/m
2
(16 lb to 19 lb) paper.
{3} “THICK PAPER”: 106 g/m
2
to 165 g/m
2
(29 lb to 44 lb) paper.
Note:
L This setting is valid for both the standard input tray and the optional input
tray.
L “THICK PAPER” will be displayed only when “#1” is selected for the
following:
– Paper input tray setting for fax (Feature #440 on page 63).
– Paper input tray setting for copy (Feature #460 on page 64).
– Paper input tray in PCL
®
(Feature #760 on page 65).
– Paper input tray setting for the scan to e-mail print feature (Feature #565
on page 71).
Setting the waiting time for
the power save mode
{#}{4}{0}{3}
To set the length of time before the unit enters the power save mode.
{1} “5min”: 5 minutes
{2} “15min” (default): 15 minutes
{3} “30min”: 30 minutes
{4} “1h”: 1 hour
Note:
L During the power save mode, the unit needs to preheat the fuser unit before
printing.
Holding the previous contrast
setting
{#}{4}{6}{2}
{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes.
Setting the default operation
mode
{#}{4}{6}{3}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} “COPY” (default): Copy mode is selected as default.
{2} “FAX”: Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{4}{6}{4}
To set the timer before returning to the default operation mode (feature #463).
{0} “OFF”: Deactivates this feature.
{1} “30s”: 30 seconds
{2} “1min” (default): 1 minute
{3} “2min”: 2 minutes
{4} “5min”: 5 minutes
Cleaning the drum
{#}{4}{8}{0}
Clean the drum cartridge automatically. See page 103 for details.
Setting toner save feature
{#}{4}{8}{2}
{0} “OFF” (default): Deactivates this feature.
{1} “ON”: The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
Changing the color
calibration for all colors
(cyan, magenta, yellow and
black)
{#}{4}{8}{5}
Change the color calibration if color printing is too dark or too light. See page 76
for details.
Changing the color
calibration for cyan color
{#}{4}{8}{6}
Change the color calibration if color printing is too dark or too light. See page 76
for details.
Feature/Code Selection