Filter
Top Products
12
Setup (Base Unit)
For fax advantage assistance, call 1-800-435-7329.
Ink film – installing / replacing!
1
Open the front cover by pulling up the center
part.
●
If the handset is on the cradle, take it off
before opening the cover.
Center part
Front cover
2
Push the back cover open button (green) on
the right side of the unit.
OR
Push the back cover open lever (green)
inside of the unit.
Back cover
open button
(green)
Back cover
open lever (green)
OR
3
Open the back cover.
●
If you are installing the included ink film for
the first time, skip to step 6.
Back cover
Install the included ink film or replace the used ink film with new one.
The following ink films are available for replacement.
Model No. KX-FA53: Replacement film (1 roll)
Model No. KX-FA55: Replacement film (2 rolls)
Each roll prints about 150 letter-size pages. See page 8 for accessory information.
4
For replacement only
Pull out the blue gear and remove the used
ink film. Remove the used core.
Used
ink film
Blue
gear
Used core