Filter
Top Products
Feature & Display
#01
Features Summary
80
Basic features!
Programming table
Code
Setting the date and time
SET DATE & TIME
PRESS SET
mm/dd/yy
hh:mm
(2 digits for
each entry)
See page 17 for details.
See page 18 for details.
See page 20 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails.
“ON”: The sending report will be
printed out after every transmission.
#02
Setting your logo
YOUR LOGO
PRESS SET
(Up to 30
characters)
Settings How the unit operates
#03
Setting your facsimile telephone
number
YOUR FAX NO.
PRESS SET
(Up to 20
digits)
#04
Printing the sending report
To print and check the sending
report for fax transmission results
(p. 44).
SENDING REPORT
MODE=ERROR [±]
ERROR
ON
OFF
(The default setting is in bold type.)
This setting is also available after
activating FAX ONLY mode (p. 53).
#06
Changing the ring setting in FAX
ONLY mode
To change the number of rings
before the unit answers a call
in FAX ONLY mode.
FAX RING COUNT
RINGS=3 [±]
1, 2, 3, 4
Changing the ring setting in
TAD/FAX mode
To change the number of rings
before the unit answers a call
in TAD/FAX mode.
TAD RING COUNT
RINGS=2 [±]
1, 2, 3, 4
TOLL SAVER
RINGER OFF
This setting is also available after
activating TAD/FAX mode.
See page 62 for details.
1. Press .
2. Press or until the desired feature
is displayed.
3. Press or until the desired setting
is displayed.
4. Press .
5. Press .
MENU
SET
MENU
Note:
●
For features #01, #02 and #03, refer to the pages
in the below table.
●
Step 3 may be slightly different depending on the
feature.
●
See page 79 for more details.
How to set menu options