Filter
Top Products
53
Receiving Faxes
SET
AUTO ANSWER
FAX ONLY mode!
(all calls are received as faxes)
1
Set feature #77 to “FAX ONLY” (p. 87).
2
If the arrow (▼) is not shown on the right of
the display, turn it on by pressing
.
●
The display will show the number of rings
before the unit answers a call in FAX
ONLY mode.
Display:
3
If you wish to change the ring setting, press
or until the desired number is
displayed, and press .
ON
●
When receiving calls, the unit will
automatically answer all calls and only
receive fax documents.
▼
PICKUP & RCV FAX
AFTER 3 RINGS[±]
AUTO ANSWER
Line 1
– Phone calls
Line 2
– Faxes
Only a fax machine is connected.
Activating FAX ONLY mode
Note:
●
If the arrow (▼) is already shown on the right of the
display and you wish to change the ring setting, turn
the arrow off once then on again by pressing
and follow the instructions in
step 3.
●
This mode should not be used with a telephone line
which is used for both phone calls and faxes. Fax
communication will be attempted even if someone is
trying to call you. We recommend the following setup.
Example:
AUTO ANSWER
SET