Filter
Top Products
Remote Operation
69
Erases a specific message
Erases all messages
Changes to TEL mode
Turns ON message transfer
Turns OFF message transfer
Turns ON pager call
Turns OFF pager call
Remote command
The following operations can be performed from a remote location using a touch tone telephone.
Program the remote operation ID (feature #11 on page 81) and set the unit to TAD/FAX
mode before going out (p. 62).
Dial key
Page
Dial key
Remote command Page
Skips the greeting message
Repeats a message
Skips a message
New message playback
All message playback
Room monitor
Re-records a greeting message
Stops re-recording of a greeting
message
9
7
6
5
4
2
1
0
71
70
70
70
70
71
71
71
8 4
8 3
8 2
8 1
8 0
5
4
71
71
71
71
71
71
71
Remote operation card
Please cut out and carry this card for assistance when using the remote operation.
Mailbox Remote Operation Notice of Remote Operation
Fold here
■
Recording a message in a
mailbox:
1. Call your unit.
2. Press and the
mailbox no. ( or ).
3. Leave a message.
■
Retrieving messages from
a mailbox:
1. Call your unit.
2. Press and the
mailbox no. ( or ).
3. Enter the mailbox
password .
4. Press the remote
command key (see the
reverse side).
●
, , and
cannot be used.
8 4
8 3
8 2
8 1
2
1
2
1
●
The remote operation is
available only from a touch
tone telephone when the
unit is in TAD/FAX mode.
●
When the unit is in TEL
mode, call your unit and
wait for 10 rings. The
answering device will
temporarily answer the line.
Enter the remote operation
ID during the greeting
message.
The unit will switch to
TAD/FAX mode.
●
When you press a key,
press firmly.
●
To send a document, press
. When a fax tone is
heard, start transmission.
9
Operating from a remote location!