49
Sending Faxes
Sending the same document to pre-programmed parties
1
Insert the document FACE DOWN.
●
If necessary, press or repeatedly
to select the desired resolution (p. 43).
2
Press .
Display:
3
Press or until the following is
displayed.
4
Press .
● The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each item, calling each
number sequentially.
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report
.
SET
<BROADCAST>
SEND:PRESS SET
DIRECTORY [+ -]
<MAILBOX>
H
FACE DOWN
STOP
SET
Note:
●
If you select the “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
●
If the document exceeds the memory
capacity (p. 108), sending will be canceled.
●
If one of the items is busy or does not
answer, the item will be skipped. All skipped
items will be redialed up to 2 times after all of
the other items have been called.
To cancel the broadcast setting
1. Press while the unit displays the
following.
Display:
●
The display will show the following.
2. Press .
SET
SEND CANCELED?
YES:SET/NO:STOP
BROADCASTING
STOP
To send to selected parties only once
You can also select the parties for each transmission.
1. Follow steps 1 and 2 above.
2. Press or until the following is displayed.
Display:
3. Press to start programming the items you
want to transmit.
4. Press or until the desired item you want to
transmit is displayed.
Example:
5. Press .
Example:
●
To program other items, repeat steps 4 and 5
(up to 20 items).
6. Press to start transmission to the
programmed items.
SET
DIR=Bill [01]
SEND:PRESS SET
SET
Bill
6543210
DIR= [00]
NAVI.[+ -]A&ASET
SET
<ONE1TIME1BROAD>
PRESS SET