57
Receiving Faxes
Pager call - when the unit receives a fax or !
voice message!
This feature allows your unit to call your pager when your unit receives a fax document or an
incoming voice message.
1
Press .
Display:
2
Press , then .
3
Press or to select “ON”.
●
If this feature is not required, select “OFF”.
4
Press .
5
Enter your pager number up to 30 digits.
Example:
6
Press .
7
Enter your pager access code up to 10 digits
if required.
Example:
8
Press .
●
The default code 07734 will show “Hello!”
on your pager.
●
If you want to change this message, enter
your message up to 30 digits.
9
Press .
●
The unit will dial the stored number.
PAGER TEST
SET
MSG.=07734
SET
PIN=12345678
PIN=
SET
NO.=12025551234
NO.=
SET
PAGER CALL
MODE=ON [±]
PAGER CALL
MODE=OFF [±]
7 0
SYSTEM SET UP
PRESS NAVI.[I H]
MENU
SET
MENU
DIGITAL SP-PHONE
Note:
●
If
you have subscribed to a Caller ID service,
instead of the message you entered in
step 8, your pager will display the caller
’s
telephone number, followed by “11” or “22”.
11:
When your unit receives a voice message.
22: When your unit receives a fax document.
●
If you have not entered a message in step 8,
your pager will only display “11” or “22”.
10
Check that your pager received
the pager test call.
11
Press .
DIGITAL SP-PHONE