Filter
Top Products
Incoming Messages
66
QUICK
When the unit has recorded new voice messages:
— the PLAY MESSAGES indicator will flash,
— the call counter will show the total number of recorded messages, and
— slow beeps will sound if the message alert feature is activated (feature #42 on page 84).
Example:
02
STOP
QUICK
ERASE
SET
SLOW
FLASH/LIGHT
Press .
●
Only the new recorded messages will be
played.
●
Adjust the speaker volume using or
.
●
After playing back all of the new messages,
the PLAY MESSAGES indicator will stop
flashing but will remain lit up.
If you press at this
time, all the recorded messages will be
played.
PLAY MESSAGES
PLAY MESSAGES
Listening to recorded messages using the base unit
!
Call counter
To repeat a message
Press while listening to the message.
●
If you press within 5 seconds of the
beginning of the message, the previous
message will be played.
●
To play back a specific message, press or
and search for the message you want to
listen to.
To skip a message
Press to play the next message.
To stop playback
Press .
●
If you press within 1
minute, the unit will resume playing the rest of
the messages.
Voice time/day stamp
During playback, a synthesized voice will
announce the time and day of the week that each
message was recorded.
STOP
To change the playback speed
Press to play messages at one and a
half times the original speed.
Press to play messages at half the
original speed.
●
To return to the original speed, press
or again during quick or slow playback.
To erase a specific message
Press while listening to the message
you want to erase.
To erase all the messages
Check that you have listened to all of the recorded
messages.
1. Press .
Display:
2. Press
.
3. Press .
●
Messages recorded in voice mailbox will not be
erased.
SET
ERASE MESSAGES?
YES:SET/NO:STOP
SET
ALL MESSAGES
PRESS SET
ERASE
ERASE
SLOW
SLOW
QUICK
PLAY MESSAGES