Filter
Top Products
Powering on/off
Connecting the power cord
Make sure that the supplied power cord is securely xed to the projector body to prevent it from being removed easily.
For details of power cord handling, refer to “Read this rst!” (
Æ
page 5).
Attaching
Check the shapes of the <AC IN> terminal on the back of the projector body and the power cord 1)
connector and insert the plug completely in the correct direction (until you hear the side tabs click in
place).
Removing
Turn off the projector, and then remove the AC power cord from the electrical outlet.1)
Remove the AC power cord connector from the <AC IN> terminal on the projector while pressing the 2)
tabs on its sides.
34 - ENGLISH
Chapter 3 Basic Operations - Powering on/off