Filter
Top Products
ON(G)/STANDBY(R) indicator
The ON(G)/STANDBY(R) indicator informs you the status of the power. Conrm the status of the <ON(G)/STANDBY(R)>
indicator before operating the projector.
ON(G)/STANDBY(R) indicator
Indicator status Status
Off The power cord is unplugged.
Red
Lit
The power cord is plugged.
The [STANDBY MODE] is set to [ECO] when the projector is in standby mode and the
cooling is completed.
Blinking
The power is switched off (in standby mode). The [STANDBY MODE] is set to [NETWORK].*
1
The power is switched off (in standby mode). The [STANDBY MODE] is set to [NORMAL].*
2
Orange Lit
The projector is cooling down. The power is switched off after a while. (Changes to the
standby mode.)
Green
Lit Projecting.
Blinking
The power is on and the lamp is not working. The [POWER MANAGEMENT] is set to [READY].*
3
The lamp starts work.*
4
The projector will project image after a while.
*1: The indicator will light as the following order:
2.75 seconds (light) → 0.25 seconds (off) → 0.75 seconds (light) → 0.25 seconds (off)
*2: The indicator will light as the following order:
2.75 seconds (light) → 0.25 seconds (off)
*3: The indicator will light as the following order:
2.0 seconds (light) → 2.0 seconds (off)
*4: The indicator will light as the following order:
0.5 seconds (light) → 0.5 seconds (off)
ENGLISH - 35
Chapter 3 Basic Operations - Powering on/off