Filter
Top Products
[RGB/YPBPR]/[RGB/YCBCR]
Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB] or [YCBCR], [YPBPR]
in accordance with the input signal.
Press 1) as to select [RGB/YPBPR] or [RGB/YCBCR].
Press 2) qw or the <ENTER> button.
The [RGB/YP f BPR] or [RGB/YCBCR] individual adjustment screen is displayed.
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[AUTO] The sync signal automatically selects the signal [RGB]/ [YPBPR]/[YCBCR].
[RGB] Select it for RGB signal input.
[YPBPR] Select it for YPBPR signal input.
[YCBCR] Select it for YCBCR signal input.
When the <COMPUTER 1 IN> terminal is selected
For 525i (480i), 625i (576i), 525p (480p) and 625p (576p) input f
Select [AUTO], [RGB] or [YCBCR].
For other movie-based signal input f
Select [AUTO], [RGB] or [YPBPR].
When the <HDMI IN > terminal is selected
For 525p (480p) and 625p (576p) input f
Select [AUTO], [RGB] or [YCBCR].
For other movie-based signal input f
Select [AUTO], [RGB] or [YPBPR].
Note
Refer to “List of compatible signals” ( f Æ pages 108-109) for the signal details.
The signal selection may not function properly depending on connected devices. f
ENGLISH - 53
Chapter 4 Settings - [PICTURE] menu