Filter
Top Products
[Network cong] page
Click [Detailed set up] → [Network cong].
Click [Network cong] to display the [CAUTION!] screen. f
The current settings are displayed by pressing the [Next] button. f
Click [Change] to display the setting change screen. f
2
7
1
3
4
5
6
[Projector name]1
Enter the name of the projector. Enter the host name if it
is required when using a DHCP server etc.
[DHCP ON]/[DHCP OFF]2
To enable the DHCP client function, set to [DHCP ON].
[IP ADDRESS]3
Enter the IP address when not using a DHCP server.
[SUBNET MASK]4
Enter the subnet mask when not using a DHCP server.
[DEFAULT GATEWAY]5
Enter the default gateway address when not using a
DHCP server.
[DNS1]/[DNS2]6
Enter the DNS1/DNS2 server address.
Permissible/ available characters for the entry of DNS1/
DNS2 server address.
(primary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.253).
[Back]/[7 Next]
Click the [Back] button to return to the original screen.
The current settings are displayed by pressing the [Next]
button.
Click the [Submit] button to update the settings.
Note
When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In f
that case, click [Network cong] again since the following operation will not be guaranteed.
Changing LAN settings while connected to the LAN may cause the connection to cut out. f
84 - ENGLISH
Chapter 4 Settings - [NETWORK] menu