[Control System]1
Set the information required for communicating with the
controller to be connected with the projector.
[User Password]2
Set the user rights password for the Crestron
Connected™ control page.
[Admin Password]3
Set the administrator rights password for the Crestron
Connected™ control page.
Network status4
Displays the settings of wired LAN.
[DHCP]
Displays the current setting.
[Ip Address]
Displays the current setting.
[Subnet Mask]
Displays the current setting.
[Default Gateway]
Displays the current setting.
[DNS Server]
Displays the current setting.
[Exit]5
Returns to the control page.
[Info] page
Click [Info] on the control page.
[Projector Name]1
Displays the projector name.
[Mac Address]2
Displays the MAC address.
[Lamp Hours]3
Displays the runtime of the lamps (converted value).
[Power Status]4
Displays the status of the power.
[Source]5
Displays the selected input.
[Lamp Mode]6
Displays [LAMP POWER] (
Æ
page 68).
[Error Status]7
Displays the error status.
[Exit]8
Returns to the control page.
[Help] page
Click [Help] on the control page.
The [Help Desk] window is displayed.
[Help Desk]1
Send/receive messages to/from an administrator who uses
Crestron Connected™
92 - ENGLISH
Chapter 4 Settings - [NETWORK] menu
