Filter
Top Products
[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
Press 1) as to select [NAME CHANGE].
Press the <ENTER> button.2)
The [NAME CHANGE] screen is displayed. f
Select characters with the 3) asqw buttons and press the <ENTER> button to enter the projector
name.
Select [ALL DELETE] to delete all the entered characters, or press the <DEFAULT> button on the remote control to f
delete a character on the cursor in the entry eld.
Select [OK] with the 4) as buttons and press the <ENTER> button.
To cancel the change of the name, select [CANCEL] and press the <ENTER> button. f
Note
[Name f ] ( is 4-digit number) is set before the projector leaves the factory.
[NETWORK CONTROL]
Set when you want to control the projector from a computer connected to the network.
Press 1) as to select [NETWORK CONTROL].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[ON] This function is enabled. Web control, PJLink control, the command control of the LAN are enabled.
[OFF] This function is disabled.
[AMX D. D.]
Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to the website of AMX
Corporation.
URL http://www.amx.com/
Press 1) as to select [AMX D. D.]
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[ON] This function is enabled.
[OFF] This function is disabled.
[Crestron Connected(TM)]
Set to [ON] to control with Crestron Connected™ of Crestron Electronics, Inc.
Press 1) as to select [Crestron Connected(TM)].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[ON] This function is enabled.
[OFF] This function is disabled.
ENGLISH - 77
Chapter 4 Settings - [NETWORK] menu