Panasonic PTVX410ZU Projector User Manual


 
Press 3) as to select [MODE].
Press 4) qw to switch the item.
The items will switch each time you press the button. f
[CC1] Displays CC1 data.
[CC2] Displays CC2 data.
[CC3] Displays CC3 data.
[CC4] Displays CC4 data.
Note
Closed captions are a function that is mainly used in North America to display text information with video signals. Captions f
may not be displayed depending on the connected devices or software being played back.
[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YC f BCR signal is input.
If [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devices f
or the used content of the closed caption corresponding connection.
If a closed caption signal of the selected mode is input, the text is not displayed even when the [SECURITY] menu → [TEXT f
DISPLAY] (
Æ
page 74) is set to [ON].
Closed captions are not displayed when the menu screen is displayed. f
[SCREEN SETTING]
(Only for PT-VW340Z)
Set the screen size.
When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as necessary
for the screen in use.
Press 1) as to select [SCREEN SETTING].
Press the <ENTER> button.2)
The [SCREEN SETTING] screen is displayed. f
Press 3) qw to switch the [SCREEN FORMAT] item.
The items will switch each time you press the button. f
[SCREEN FORMAT] Description Range when [SCREEN POSITION] is selected
[16:10] The projected aspect ratio is 16:10. Cannot be adjusted.
[16:9] The projected aspect ratio is 16:9. Adjusts the vertical position.
Press 4) as to select [SCREEN POSITION].
If [SCREEN FORMAT] is set to [16:10], adjustment of [SCREEN POSITION] are not available. f
Press 5) qw to adjust the [SCREEN POSITION].
The items will switch each time you press the button. f
[HIGH] The image which aspect ratio is 16:9 will displayed at the top.
[CENTER] The image which aspect ratio is 16:9 will displayed in the center.
[LOW] The image which aspect ratio is 16:9 will displayed at the bottom.
[STARTUP LOGO]
Set the logo display when the power is turned on.
Press 1) as to select [STARTUP LOGO].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO] Displays the image registered by the user.
[OFF] Disables the startup logo display.
Note
The startup logo will disappear in approximately f 30 seconds.
To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM. f
If you do not register the image of the [USER LOGO], the startup logo will not be displayed even if the [STARTUP LOGO] is f
set to [USER LOGO].
62 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu