Filter
Top Products
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input signal before
performing various adjustments.
Press 1) as to select [TEST PATTERN].
Press the <ENTER> button.2)
The [TEST PATTERN] screen is displayed. f
Press 3) qw to switch the items.
The items will switch each time you press the button. f
ALL WHITE → COLOR BARS → WHITE CROSS ON BLACK BACKGROUND → BLACK CROSS ON THE WHITE
BACKGROUND → CROSS HATCH → ALL WHITE →...
When you press the <MENU> button or <RETURN> button, it will display the sub menu of [PROJECTOR SETUP]. f
Note
The initial setting is f ALL WHITE. The initial screen is CROSS HATCH if you have assigned it to the <FUNCTION> button.
[FILTER COUNTER]
This function is used to reset the lter use time and set the notication display.
Press 1) as to select [FILTER COUNTER].
Press the <ENTER> button.2)
The [FILTER COUNTER] screen is displayed. f
[FILTER COUNTER] Displays the using time of the lter.
[TIMER] Sets the timer when you want to display an alert message of lter replacement.
[FILTER COUNTER
RESET]
Resets the lter counter.
Setting [TIMER]
Press 1) as to select [TIMER].
Press 2) qw to switch the setting of the timer.
The items will switch each time you press the button. f
[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H]
[FILTER COUNTER RESET]
Press 1) as to select [FILTER COUNTER RESET].
The [FILTER COUNTER RESET] screen is displayed.
z
Press the <ENTER> button.2)
When the confirmation is displayed, press 3) qw to select [OK] and then press the <ENTER> button.
[INITIALIZE ALL]
Return various setting values to their factory default settings.
Press 1) as to select [INITIALIZE ALL].
The [INITIALIZE ALL] screen is displayed.
z
Press the <ENTER> button.2)
When the confirmation is displayed, press 3) qw to select [OK] and then press the <ENTER> button.
The [POWER OFF] screen is displayed.
z
Press the <ENTER> button.4)
The operation is disabled except for turning off the power.
z
Note
The projector will enter into the standby status to reect the setting values when [INITIALIZE ALL] is executed. f
72 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu