Filter
Top Products
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[AUTO]
Enables auto correction of [DAYLIGHT VIEW]. The luminance sensor detects the brightness and color of the
surroundings and automatically corrects the video display.
[ON] Enables [DAYLIGHT VIEW].
[OFF] Disables [DAYLIGHT VIEW].
Note
[DAYLIGHT VIEW] can not be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to f
[REAR/DESK] or [REAR/CEILING].
The [AUTO] mode may not function properly if an object is placed on the top of the projector. f
[DIGITAL CINEMA REALITY]
(Only for movie-based signal)
You can improve the vertical resolution of 2-2 and 2-3 pulldown video.
This function is available only with the following signal inputs.
525i (480i), 625i (576i), 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24sF, S-VIDEO signal, VIDEO signal.
Press 1) as to select [DIGITAL CINEMA REALITY].
Press 2) qw or the <ENTER> button.
The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed. f
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[ON] Enables [DIGITAL CINEMA REALITY].
[OFF] Disables [DIGITAL CINEMA REALITY].
[NOISE REDUCTION]
(Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected)
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
Press 1) as to select [NOISE REDUCTION].
Press 2) qw or the <ENTER> button.
The [NOISE REDUCTION] individual adjustment screen is displayed. f
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[ON] Enables [NOISE REDUCTION].
[OFF] Disables [NOISE REDUCTION].
Attention
When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, f
set it to [OFF]
[TV-SYSTEM]
(Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected)
The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal is
input. Set the color system matching the input signal.
Press 1) as to select [TV-SYSTEM].
Press 2) qw or the <ENTER> button.
The [TV-SYSTEM ]individual adjustment screen is displayed. f
Press 3) qw to select the color system.
The items will switch each time you press the button. f
Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM]. f
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], f
[SECAM], or [PAL60].
52 - ENGLISH
Chapter 4 Settings - [PICTURE] menu