Filter
Top Products
24 –
ENGLISH
Installation (continued)
Installation dimensions diagram
Figure 1 : Dimensions applying when
one unit is used
Figure 2 : Dimensions applying when
two units are used)
Figure 3 : Set rotation direction
50 cm or
50 cm or
more
more
Exhaust
30 cm or more
30 cm or more
40 cm or
more
Exhaust
50 cm
50 cm
or more
or more
50 cm
50 cm
or more
or more
10 cm or more
10 cm or more
50 cm
50 cm
or more
or more
40 cm
40 cm
or more
or more
Exhaust
FILTER
CLEANING
OPEN
CLOSE
+15
+15
+15
+15
+15
+15
+15
+15
Attention
Leave a space of 50 cm or more behind the projector for replacing the lamp and ensuring the air exhaust vents •
are not blocked.
Set up the projector so that air can flow freely around the rear of the projector without staying still. In addition, •
leave a space of 30 cm or more at the sides so that the hot air coming out from the air outlet vents does not get
drawn in through the air intake vents.
Set up the projector with a space of 40 cm or more at the front so that the air filter can be replaced.•
When the projector is to be placed inside a box and used, ensure the structure has a duct or the like to •
discharge air from the box, leave the clearances shown in Fig. 2, and ensure the temperature during operation
remains within the 0 C to 35 C range.