Filter
Top Products
ENGLISH
– 31
Getting Started
Connecting the signal to the SD-SDI input module
SD-SDI Module
ET-MD77SD1
IN
SERIAL
OUT
LAN
SD-SDI input module (optional)
ET-MD77SD1 (for 480i/576i)
SD-SDI signal SD-SDI signal output
(active through)
LAN terminal
*1
(10BASE-T/100BASE-TX)
Business digital
VCR
Note
If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this •
happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being
input.
You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 56-57)•
*1: The LAN terminal of the input module (optional) cannot be used. Use the LAN terminal that is provided as
standard with the projector.
Connecting the signal to the HD/SD-SDI input module
HD/SD-SDI input module (optional)
ET-MD77SD3 (for HD/SD)
Business digital
VCR
HD/SD-SDI
Module
ET-MD77SD3
IN
SERIAL
OUT
LAN
HD-SDI or SD-SDI
signal output
(active through)
LAN terminal
*1
(10BASE-T/100BASE-TX)
HD-SDI or SD-SDI
signal
Note
You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 56-57)•
If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this •
happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being
input.
To ensure full imaging performance, use a connecting cable with the specifications of 5CFB or higher, or of •
Belden1694A or higher.
(For example: 5CFB, 5CFTX, 7CFB, Belden1694A, etc.)
*1: The LAN terminal of the input module (optional) cannot be used. Use the LAN terminal that is provided as
standard with the projector.