Filter
Top Products
28 –
ENGLISH
Installation of input module (optional)
Installing the input module
Types of the input modules (optional)
Prepare beforehand an input module (optional) compatible with the input signals of the system.
Module
Module model
No.
Terminal Signal formats supported
SD-SDI
input module
ET-MD77SD1
BNC input × 1
BNC output × 1
SMPTE259M compliant : 480i, 576i
RJ-45 input × 1
*1
10BASE-T/100BASE-TX
HD/SD-SDI
input module
ET-MD77SD3
BNC input × 1
BNC output × 1
SMPTE259M compliant : 480i, 576i
SMPTE292M compliant :
720/60p, 720/59.94p, 720/50p
1 035/60i, 1 035/59.94i, 1 080/60i, 1 080/59.94i
1 080/50i, 1 080/24sF, 1 080/23.98sF, 1 080/30p
1 080/29.97p, 1 080/25p, 1 080/24p, 1 080/23.98p
RJ-45 input × 1
*1
10BASE-T/100BASE-TX
ET-MD100SD4 BNC input × 2
Single link SD-SDI Signal : 480i, 576i
Single link HD-SDI Signal (YP
BPR 4:2:2) :
720/60p, 720/59.94p, 720/50p, 1 080/60i,
1 080/59.94i, 1 080/50i, 1 080/24sF, 1 080/23.98sF,
1 080/30p, 1 080/29.97p, 1 080/25p, 1 080/24p,
1 080/23.98p
Dual link HD-SDI signal (RGB 4:4:4) :
1 920 × 1 080/50i, 1 920 × 1 080/59.94i,
1 920 × 1 080/60i, 1 920 × 1 080/23.98p,
1 920 × 1 080/23.98sF, 1 920 × 1 080/25p,
1 920 × 1 080/24p, 1 920 × 1 080/24sF,
1 920 × 1 080/29.97p, 1 920 × 1 080/30p
Dual link HD-SDI signal (X’ Y’ Z’ 4:4:4) :
2 048 × 1 080/23.98p, 2 048 × 1 080/23.98sF,
2 048 × 1 080/24p, 2 048 × 1 080/24sF
DVI-D
input module
ET-MD77DV
DVI-D 24p input × 1
HDCP-compliant
*2
DVI-D single link, DVI 1.0 compliant
480p, 576p, 720/60p, 720/59.94p, 720/50p
1 080/60i, 1 080/59.94i, 1 080/50i 1 080/24sF,
1 080/23.98sF
1 080/30p, 1 080/29.97p, 1 080/25p, 1 080/24p,
1 080/23.98p
1 080/60p, 1 080/59.94p, 1 080/50p
Displayable resolution VGA - WUXGA
*3
(non-interlace)
Dot clock frequency 25 - 162 MHz
RJ-45 input × 1
*1
10BASE-T/100BASE-TX
*1: The LAN terminal of the input module (optional) cannot be used. Use the LAN terminal that is provided as
standard with the projector.
*2: HDCP (High-bandwidth Digital Content Protection)
HDCP is a specification for encoding digital image signals which was developed to protect digital content.
The DVI-D/HDMI output signals from the HDCP-compliant equipment have been encoded by the HDCP
specifications to ensure content protection, but the DVI-D input module is capable of displaying the digital
images properly since it complies with the HDCP specification.
*3: The WUXGA signals support only VESA CVT-RB (Reduced Blanking) signals.