Filter
Top Products
34 –
ENGLISH
How to install and remove the projection lens (optional)
Adjust the lens shift position so that it is at the home
position (p. 39) before installing or removing the
projection lens.
Attention
Remove the dust-proof sponge from the lens fitting •
of the projector before installing the projection lens.
(Keep the dust-proof sponge in a safe place for
later use if needed.)
After removing the projection lens, install the dust-•
proof sponge to the lens fitting of the projector in
order to stop dust from getting inside the projector.
How to install the
projection lens
While pressing the projection 1.
lens cover lock button, pull the
cover forward to remove it.
FILTER
CLEANING
OPEN
CLOSE
Projection lens cover lock button
Align the mark (orange) on 2.
the projection lens with the
mark on the projector (
), and
then insert the lens and turn
it clockwise until it clicks into
place.
Mark (orange)
Push the projection lens cover in 3.
until it clicks into place.
How to remove the
projection lens
While pressing the projection 1.
lens cover lock button, pull the
cover forward to remove it.
FILTER
CLEANING
OPEN
CLOSE
Projection lens cover lock button
While holding down the 2.
projection lens lock button,
turn the projection lens counter
clockwise, and then pull it off.
Projection lens lock button