Panasonic TQBJ 0268-5 Projector User Manual


 
ENGLISH
71
Special Features
DEFAULT:
To receive signals of which image aspect is
4:3 or 5:4 (applicable resolution : 640 × 400,
640 × 480, 800 × 600, 832 × 624, 960 × 720,
1 024 × 768, 1 152 × 864, 1 152 × 870, 1 280 × 960,
1 280 × 1 024, 1 600 × 1 200, 1 400 × 1 050)
WIDE:
To receive signals of which the image aspect is
wide (applicable resolution: 720 x 400, 848 x 480,
1 280 x 720, 1 024 x 600, 1 120 x 750, 1 440 x 900,
1 680 x 1 050)
USER:
To receive signals of specific horizontal resolution
(number of horizontally displayed dots)
If “User” is selected, press ◄► 8.
to enter the horizontal resolution
of signal source into “DISPLAY
DOTS”.
Press ENTER.9.
Execute automatic adjustment. A message
“PROGRESS...” appears during automatic
adjustment. When the adjustment is complete,
the system returns to the input screen.
DVI-D IN
Change this setting if video does not display normally
when the projector and an external device are
connected via DVI-D.
Press ▲▼ to select “DVI-D IN”.1.
RGB IN
DVI-D IN
AUX DVI IN
Press ENTER.2.
The “DVI-D IN” screen will be displayed.
DVI-D IN
DVI EDID
DVI SIGNAL LEVEL
EDID1
0-255:PC
Press ◄► to switch “DVI EDID”.3.
The setting will change as follows each time
◄► is pressed.
EDID1 EDID2(PC)
EDID1 (Input signal formats supported) :
Mainly select this when an external device (DVD
player, etc.) for outputting video signals of a moving
image system is connected to DVI-D IN.
EDID2 (Input signal formats supported) :
Mainly use this when an external device (PC, etc.)
for outputting video signals of a still image system
is connected to DVI-D IN.
Press ◄► to switch “DVI 4.
SIGNAL LEVEL”.
The setting will change as follows each time
◄► is pressed.
0-255:PC 16-235
0-255:PC:
Select this when, for example, an external device
(PC, etc.) is connected via the DVI terminal output.
16-235:
Select this when, for example, an external device
(DVD player, etc.) is connected via the HDMI
terminal output using a conversion cable.
Note
The optimal setting differs depending on the output
setting of the connected external device. Refer to
the instruction manual of the external device.
If the setting is changed, the data for plug and
play changes. For the plug and play compatible
resolutions, check the compatible signal list
(pp. 120-121).