Panasonic WJ-GXE500E Webcam User Manual


  Open as PDF
of 73
 
36
Setup items Setting values (Underlined: default)
H.264(2) Ch2 -
Ch4
Unicast port1(Image) *21 1 024 - 50 000
(Default:[Ch2]32016[Ch3]32018[Ch4]32020)
Multicast address AvailableIPv4address:224.0.0.0-239.255.255.255
AvailableIPv6address:Multicastaddressstartingwith
"FF"
(Default:[Ch2]239.192.0.23
[Ch3] 239.192.0.25
[Ch4] 239.192.0.27)
Multicast port *21 1 024 - 50 000
(Default:[Ch2]37006[Ch3]37008[Ch4]37010)
Multicast TTL/HOPLimit *23 *24 1-254(Default:16)
Important:
*23 •WhentwoormorenetworkinterfacecardsareinstalledonthePCinuse,thenetworkinterfacecard(s)not
used for receiving images should be invalidated when displaying images using the multicast port.
*24 •WhentransmittinganH.264imageviaanetwork,thetransmittedimagesometimesmaynotbedisplayed
depending on the settings of a proxy server or a firewall. In this case, refer to the network administrator.
*1 •Whenthissettingischanged,theunitwillrebootautomatically.
*2 •i-PROSeriesdoesnotsupport"D1",ifnotspecified.(AsofMay,2010)
*3 •When"On"isselectedfor"H.264transmission",therefreshintervalmaybelongerthanthesetvalue
when any value with an asterisk (*) on the right is selected.
*4 •When"On"isselectedfor"H.264transmission"in"H.264(1)"or"H.264(2)",thetransmissionintervalof
JPEG images may be longer.
*5 •When"On"isselectedfor"H.264transmission"in"H.264(1)",displayingofH.264imagesorJPEGimages
on the "Live" page will be available.
*6 •When"On"isselectedfor"H.264transmission"in"H.264(1)"and"H.264(2)",H.264imagesareviewable
using other devices with each setting.
*7 •When"On"isselected,H.264imagesandaudiowillbetransmittedusingtheHTTPport.
*8 •When"On"isselected,only"Unicastport(AUTO)"willbeavailablefor"Transmissiontype".
*9 •When"On"isselected,H.264imagesmaynotbedisplayeddependingonthenumberoftheconcurrent
access users and audio data availability, etc.
*10 •When"On"isselected,onlyIPv4accessisavailable.
*11 •When"On"isselectedforeither"H.264(1)"or"H.264(2)",themaximumconcurrentaccessnumberis
equal to or less than 8 users.
*12 •When"Framerate"issetfor"Transmissionpriority",numberofuserswhocanaccesstheunitmaybe
decreased.
*13 •When"Framerate"isselectedfor"Transmissionpriority",thissettingisavailable.
*14 •"Framerate"issynchronizedwith"Maxbitrate(perclient)*".Forthisreason,theframeratemaybelower
than the specified value when any value marked with an asterisk (*) is selected.
*15 •"Unlimited*"isavailablewhen"Framerate"isselectedfor"Transmissionpriority".
*16 •Thebitrateissynchronizedwith"Bandwidthcontrol(bitrate)"onthe[Network]tabof"Network"page.For
this reason, the bit rate may be lower than the value when any value with an asterisk (*) on the right is
selected. (☞ Page 54)
*17 •When"Unlimited*"isselectedforeither"H.264(1)"or"H.264(2)",themaximumconcurrentaccessnum-
ber is 1 user.
*18 •When"Constantbitrate"isselectedfor"Transmissionpriority",thissettingisavailable.
 previous next