Panasonic WJ-GXE500E Webcam User Manual


  Open as PDF
of 73
 
67
•When"120DPI"isnotselectedfor"DPIsetting",
they may not be displayed correctly.
Click the [Settings] tab on the "Properties" window
of "Screen" (in the control panel), and then click the
[Advanced] button. Change the "DPI setting" to
"Largesize(120DPI)".
•Imagesmaybedistortedwhennon-interlacesig-
nals, VCR (VTR) signals or signals not compliant
with the standard in your locality are transmitted.
•Blacklinesmayappearontheimagesdisplayedon
thescreenwhentransmittingtheVD2synchroniza-
tion signals to cameras not supporting the VD2 syn-
chronization.DeactivatetheVD2synchronization.
•WhentheimagecapturemodeisD1,duetothe
standard of video signal, black bars appear instead
of images on both edges of the screen. Black bar(s)
also appear(s) even in the VGA mode when signals
not compliant with the standard in your locality are
transmitted.
•Suchaphenomenonoccurswhenthevideofre-
quency of a camera and that of the unit are not fully
synchronized.
When using cameras supporting the VD2 syn-
chronization:
Select "Int" for "Video sync", and then select
"On" for "VD2".
When using cameras not supporting the VD2
synchronization:
Select "Ch1" for "Video sync".
Withthissetting,theunitoperatessynchronized
with the video frequency of the camera that sup-
plies the input signal to Ch1.
Images are not fit in the
frames.
Displayed images are distort-
ed.
Black lines appear on the
screen.
Black bars are displayed on
both edges of the screen.
A picture is sometimes output
twice or skipped.
–
–
42
–
42
Reference
pages
Cause/solution
Symptom
 previous next