Panasonic WJ-GXE500E Webcam User Manual


 
43
*3 •Select"On"or"Off"todeterminewhetherornottoapplytheVD2synchronizationmethodforthecon-
nectedcamera.WhenacameranotsupportingtheVD2synchronizationmethodisconnected,select
"Off" for "VD2".
*4 •Select"On"tocontrolcameraswiththecoaxialcommunication.
*6 •Itispossibletocompensateforthevideosignaltransmissionlossfromthecamera.
*7 •ThefollowingcablelengthsettingsarereferenceswhenusingRG-59/U,BELDEN9259(forNTSCmod-
els), 5C-2V (for PAL models) or equivalent cables.
S:Lessthan400m{1300ft.}
M:400m{1300ft.}to700m{2300ft.}
L:700m{2300ft.}to1200m{4000ft.}
*8 •WhencameraswiththedifferentRS-485protocols(forexample,camerasmanufacturedbyPanasonic
and those manufactured by Pelco, Inc.) in the same RS-485 communication line, the cameras will not
work correctly.
*9 •Selectthecommunicationprotocolthatiscompliantwiththespecificationsoftheconnectedcameras.
*10 Refer to the readme file on the provided CD-ROM for further information about the RS-485 command
table.
*11 •Select"On"tocontrolcameraswiththeRS-485communication.
*12 •SetthevalueinaccordancewiththeRS-485commandtable.Refertothereadmefileontheprovided
CD-ROM for further details.