56
[SNMP] tab
Refer to page 29 for general information about this tab.
Setup items Setting values (Underlined: default)
Community *1 (Default:None(blank))
System name (Default:None(blank))
Location (Default:None(blank))
Contact (Default:None(blank))
Important:
*1 •WhenusingtheSNMPfunction,itisnecessarytoenterthecommunityname.Whennocommunityname
is entered, the SNMP function will not work.
[FTP img. trans.] tab
Refer to page 29 for general information about this tab. Refer to page 15 for further information about the actions.
Setup items Setting values (Underlined: default)
FTP periodic
image transmis-
sion
FTP periodic image transmission *1 *2
On/Off
Directory name (Default:None(blank))
File name (Default:None(blank))
Name w/time&date / Name w/o
time&date
Transmission interval *3 *4 *5
1s/2s/3s/4s/5s/6s/10s/15s/20s/30s/
1min/2min/3min/4min/5min/6min/
10min/15min/20min/30min/1h/1.5h/2h/
3h/4h/6h/12h/24h
Imagecapturesize
QVGA/VGA
FTP image
transmission
schedule
Schedule 1 - 3 Mon/Tue/Wed/Thu/Fri/Sat/Sun
On/Off
24h
On/Off
Hour (start) 00-23(hour)(Default:00)
Minute (start) 00-59(minute)(Default:00)
Hour (stop) 00-23(hour)(Default:00)
Minute (stop) 00-59(minute)(Default:00)
Important:
*1 •When"Alarminput"or"Manual"isselectedfor"Savetrigger"onthe[SDmemorycard]tab,theFTPperi-
odic image transmission function will become unavailable. (☞ Page 31)
*2 •When"D1"isselectedfor"Imagecapturemode",FTPperiodicimagetransmissionisunavailable.
*3 •Dependingonthenetworklinespeedorthenetworktraffic,imagesmaynotbetransmittedattheexact
designated interval or period.
*4 •When"On"isselectedforbothofthealarmimagetransmissionfunctionandtheFTPperiodicimage
transmission function, the alarm image transmission function will be given priority over the FTP periodic
image transmission function. For this reason, images may not be transmitted at the exact designated
interval or period if alarms occur frequently.
*5 •Dependingontheuseenvironment,imagesmaynotbetransmittedattheexactdesignatedinterval.